Home / Product_Catalog / Page 93

Product Catalog - Page 93 Floor

A M E R I C A N O L E A N . C O M

93

USAGE

FLOORS WALLS COUNTERTOPS

F W C

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards. Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection. For additional information refer to "Factors to Consider" on p. 293. Use of a latex modified thin-set is recommended for installation. For more information, refer to p. 295. Special care should be taken when grouting; a grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products' manufacturers. For information on Test Results & Classifications, see p. 294. For Installation Considerations, Care & Maintenance information, see pp. 295-297.

INSTALLATION & PRICING

RECOMMENDED GROUT JOINT: SHADE VARIATION Floor: 3/8" RELATIVE PRICING: Medium MEDIUM (V2)

PERFORMANCE CHARACTERISTICS

ASTM# FLOOR RESULT Water Absorption C373 < 3.0% Breaking Strength C648 > 400 lbs. Scratch Hardness MOHS 7.0 Chemical Resistance C650 Resistant Abrasion Resistance C1027 N/A

SIZES

THICKNESS SQ. FT./ CARTON PIECES/ CARTON 6 x 6 Floor Tile 6" x 6" (15.20 cm x 15.20 cm) 3/8" 12.00 48

TRIM

NUMBER PIECES/ CARTON Floor Bullnose 6 x 6 P-1665 48 Floor Bullnose Corner 6 x 6 PC-1665 26 Cove Base 6 x 6 P-3665 48 Cove Base Long Corner 6 x 6 PCR-L-3665 26 Cove Base Incorner 3/4 x 6 PB-3665 50 Cove base trim is intended to coordinate with floor tile in the standard 90-degree installation position. Trim available in Paver surface only.

APPLICATIONS

TARGET DCOF WET SUITABLE Dry & Level - Interior Floor N/A Wet & Level - Interior Floor 0.42 Shower Floors (Residential or Light Commercial) 0.42 Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) 0.60 * Ramps & Inclines 0.65 Walls/Backsplashes N/A Countertops N/A Pool Linings N/A A DCOF value of 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest, refer to p. 294. APPLICATION NOTES: Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed. Suitable for industrial installations requiring high compressive strength. Subject to Oils: Absorbs oils, grease and other liquids to keep floors slip-resistant, yet does not contaminate the surface. Proper cleaning methods easily remove any contaminants that do get absorbed into the tile. * Tread Surface only

S U R E S T E P I I & P A V E R

UNGLAZED PAVER FLOOR

S U R E S T E P I I & P A V E R

All or select items within this series meet the requirements for these qualifications. For more information, refer to p. 304.

Previous Page
Next Page