Home / Product_Catalog / Page 69

Product Catalog - Page 69 Floor

A M E R I C A N O L E A N . C O M

69

Q U A R R Y N A T U R A L S

QUARRY FLOOR TILE

SHADOW GRAY N46

Q

(2) SHADOW FLASH N56 (2) LAVA RED N01

Q

(1) FIRE FLASH N02 (1) DESERT N03

Q

(1) PRAIRIE FLASH N04 (1) ABRASIVE GRAIN

USAGE

FLOORS WALLS COUNTERTOPS

F W C

APPLICATIONS

TARGET DCOF WET SUITABLE Dry & Level - Interior Floor N/A Wet & Level - Interior Floor 0.42 Shower Floors (Residential or Light Commercial) 0.42 Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) 0.60 * Ramps & Inclines 0.65 * Walls/Backsplashes N/A Countertops N/A Pool Linings N/A ** A DCOF value of 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest, refer to p. 294. APPLICATION NOTES: Suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed. Suitable for industrial installations requiring high compressive strength. Subject to Oils: Absorbs oils, grease and other liquids to keep floors slip-resistant, yet does not contaminate the surface. Proper cleaning methods easily remove any contaminants that do get absorbed into the tile. * Abrasive surface only ** 6 x 6 floor tile only

INSTALLATION & PRICING

RECOMMENDED GROUT JOINT: SHADE VARIATION Floor: 3/8" RELATIVE PRICING: Low to High MEDIUM (V2) (Solid) HIGH (V3) (Flashed)

PERFORMANCE CHARACTERISTICS

ASTM# FLOOR RESULT Water Absorption C373 3.0% Breaking Strength C648 > 400 lbs. Scratch Hardness MOHS 7.0 Chemical Resistance C650 Resistant Abrasion Resistance C1027 N/A

SIZES

THICKNESS SQ. FT./ CARTON PIECES/ CARTON 8 x 8 Floor Tile 8" x 8" (20.30 cm x 20.30 cm) 1/2" 11.11 25 6 x 6 Floor Tile 6" x 6" (15.20 cm x 15.20 cm) 1/2" 11.00 44 3-7/8 x 8 Floor Tile 3-7/8" x 8" (9.80 cm x 20.30 cm) 1/2" 10.76 50

TRIM

NUMBER PIECES/ CARTON Floor Bullnose 6 x 6 Q-1665U 44 Floor Bullnose Corner 6 x 6 QCRL-1665U 44 Floor Bullnose 8 x 8 Q-1885U 25 Floor Bullnose Corner 8 x 8 QCRL-1885U 25 Cove Base

H

5 x 8 Q-3585U 24 Cove Base

H

5 x 6 Q-3565U 44 Cove Base Outcorner

H

5 x 6 QCR-L-3565U 20 Cove Base Incorner

H

5 x 1 QB-3565U 25 Cove base trim is intended to coordinate with floor tile in the standard 90-degree installation position.

H

Not available in Flash colors; use coordinating solid color Q SPECIAL SURFACES: Abrasive grain available in N01, N03 and N46 in 6 x 6 and 8 x 8 sizes. Abrasive grain particles added to Quarry Naturals give improved slip resistance for many types of footwear, depending on maintenance conditions. (1) & (2) notations indicate price group, (1) being the least expensive.

Q U A R R Y N A T U R A L S

QUARRY FLOOR

All or select items within this series meet the requirements for these qualifications. For more information, refer to p. 304.

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards. For additional information refer to "Factors to Consider" on p. 293. We do not recommend light colored quarry tile in commercial kitchens unless properly sealed or a grout release is used. Periodic resealing of the tile may be necessary. Special care should be taken when grouting; a grout release is recommended to prevent finely powdered pigments from lodging in the pores of the tile surface. It is necessary to follow the proper procedures and recommendations from the grout and maintenance products' manufacturers. For information on Test Results & Classifications, see p. 294. For Installation Considerations, Care & Maintenance information, see pp. 295-297.

Previous Page
Next Page