Glazed Porcelain is continued from previous page.
A M E R I C A N O L E A N . C O M
F U S I O N C O T T O W I T H R E V E A L I M A G I N G
> 275 lbs.
> 250 lbs.
Special Installation Requirement: For proper bonding,
medium bed mortar should be utilized in installing tiles with a
dimensional length size greater than 20 x 20, large rectangles
or tiles with greater dimensional thickness than normal. Back
buttering tiles of this nature in the installation process will also
assure proper coverage for bonding.
Since there is shade variation in all fired ceramic products, the
tile and trim supplied for your particular installation may not
match these samples. Final selection should be made from
actual tiles and trim and not from tile and trim samples or
color reproductions. Manufactured in accordance with ANSI
Water, oil, grease, etc. create slippery conditions.
Floor applications with exposure to these conditions require
extra caution in product selection.
Use of a latex modified thin-set is recommended for proper
All or select items within this series are made in the USA.
For more information visit www.americanolean.com.
12 x 12 Field Tile
11-13/16" x 11-13/16"
(30.00 cm x 30.00 cm)
12 x 24 Field Tile
11-13/16" x 23-13/16"
(30.00 cm x 60.48 cm)
18 x 18 Field Tile
17-13/16" x 17-13/16"
(45.20 cm x 45.20 cm)
2 x 4 Brick-Joint Mosaic
12" x 12" Sheet
(30.48 cm x 30.48 cm Sheet)
3 x 12
Bullnose is intended to coordinate with floor field tile in the standard 90-degree installation position.
TILE THICKNESS: 5/16" (12 x 12, 18 x 18),
3/8" (12 x 24), 1/4" Mosaic
RECOMMENDED GROUT JOINT: 3/16" Floor
(when rectangular size is used in a staggered brick-joint pattern,
overlap should not exceed 33%),
RELATIVE PRICING: Medium to High
Dry & Level - Interior
Wet & Level - Interior
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Mosaics suitable for exterior applications in non-freezing climates only when proper installation methods are followed.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It
replaces the SCOF value of 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and
about the DCOF AcuTest
, visit www.americanolean.com/dcof.
For information on Test Results & Classifications, see page 249.
For Installation Considerations, Care & Maintenance
information, see page 257.
2 x 4 mosaic only.
Previous Page - Next Page
-2015-2016 Product Catalog
Choose a different catalog.
Virtual Catalogs | American Olean