Home / Product_Catalog / Page 139

Product Catalog - Page 139 Floor, Wall & Mosaic

A M E R I C A N O L E A N . C O M

139

L A U R E L H E I G H T S

USAGE

FLOORS WALLS COUNTERTOPS

F W C

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards. Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection. For additional information refer to "Factors to Consider" on p. 293. Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to americanolean.com/LargeTiles for more information. Use of a latex modified thin-set is recommended for installation. For more information, refer to p. 295. For information on Test Results & Classifications, see p. 294. For Installation Considerations, Care & Maintenance information, see pp. 295-297.

INSTALLATION & PRICING

RECOMMENDED GROUT JOINT: SHADE VARIATION Floor: 3/16" (Overlap should not exceed 33% when installing tile with a length of 15" or greater in a staggered brick-joint pattern.) Wall: 1/16" (1/8" when rectangular size is installed in a staggered brick-joint pattern; overlap should not exceed 33%.) Mosaic: 1/8" RELATIVE PRICING: Medium HIGH (V3)

SIZES

THICKNESS SQ. FT./ CARTON PIECES/ CARTON 24 x 24 Floor Tile 23-13/16" x 23-13/16" (60.48 cm x 60.48 cm) 5/16" 15.76 4 18 x 18 Floor Tile 17-13/16" x 17-13/16" (45.20 cm x 45.20 cm) 5/16" 17.60 8 12 x 24 Floor Tile 11-13/16" x 23-13/16" (30.00 cm x 60.48) 5/16" 15.60 8 12 x 12 Floor Tile 11-13/16" x 11-13/16" (30.00 cm x 30.00 cm) 5/16" 14.55 15 12 x 18 Wall Tile p 12" x 18" (30.51 cm x 45.77 cm) 5/16" 16.50 11 2 x 4 Brick-Joint Mosaic p 12" x 12" Sheet (30.48 cm x 30.48 cm Sheet) 1/4" 9.96 12

PERFORMANCE CHARACTERISTICS

ASTM# FLOOR RESULT WALL RESULT MOSAIC RESULT Water Absorption C373 < 0.5% < 20.0% < 3.0% Breaking Strength C648 > 275 lbs. 100 - 230 lbs. > 250 lbs. Scratch Hardness MOHS 8.0 4.0 - 6.0 8.0 Chemical Resistance C650 Resistant Abrasion Resistance C1027 4 N/A 4

TRIM

NUMBER PIECES/ CARTON Floor Bullnose p 3 x 12 P-43C9F 22 Wall Bullnose (12" side) p 3 x 12 S-43C9W 22 Wall Bullnose Corner p 3 x 3 SN-4310 32 p Ceramic body Dot-mounted All or select items within this series meet the requirements for these qualifications. For more information, refer to p. 304.

APPLICATIONS

TARGET DCOF WET SUITABLE Dry & Level - Interior Floor N/A * Wet & Level - Interior Floor 0.42 * Shower Floors (Residential or Light Commercial) 0.42 ** Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) 0.60 Ramps & Inclines 0.65 Walls/Backsplashes N/A Countertops N/A * Pool Linings N/A ** A DCOF value of 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest, refer to p. 294. APPLICATION NOTES: Floor tile suitable for exterior applications in freezing and non-freezing climates, when proper installation methods are followed. Wall and mosaic tile suitable for exterior applications in non-freezing climates, when proper installation methods are followed. * Wall tile not suitable for this application ** Mosaic tile only

L A U R E L H E I G H T S

GLAZED PORCELAIN FLOOR AND GLAZED CERAMIC WALL & MOSAIC WITH REVEAL IMAGING

Previous Page
Next Page