Home / Product_Catalog / Page 115

Product Catalog - Page 115 Floor, Wall & Mosaic

A M E R I C A N O L E A N . C O M

115

A B O U N D

USAGE

FLOORS WALLS COUNTERTOPS

F W C

APPLICATIONS

TARGET DCOF WET SUITABLE Dry & Level - Interior Floor N/A Wet & Level - Interior Floor 0.42 * Shower Floors (Residential or Light Commercial) 0.42 * Exterior Floor Applications (including pool decking & other wet areas with minimal footwear) 0.60 Ramps & Inclines 0.65 Walls/Backsplashes N/A Countertops N/A ** Pool Linings N/A *** A DCOF value of 0.42 is the standard for tiles specified for level interior spaces expected to be walked upon when wet, as stated in ANSI A137.1-2012, Section 9.6. For more information about DCOF and the DCOF AcuTest, refer to p. 294. APPLICATION NOTES: Suitable for exterior applications in non-freezing climates, when proper installation methods are followed. Wall tile not suitable for this application * Mosaic tile only ** Floor, mosaic and 6x6 wall tile only *** Mosaic and 6x6 wall tile only

NOTES

Since there are variations in all fired ceramic and natural products, tile and trim supplied for your particular installation may not match samples. Final confirmation should be made from actual tiles and trim prior to installation. Manufactured in accordance with ANSI A137.1 standards. Not for use on ramps. Water, oil, grease, improper drainage and certain footwear can create slippery conditions. Floor applications expected to be exposed to these conditions require extra caution in product selection. For additional information refer to "Factors to Consider" on p. 293. Special consideration needs to be given when installing tiles greater than 15 inches. Please refer to americanolean.com/LargeTiles for more information. Manufacturer Advisory: All tile is measured by the DCOF AcuTest method. Tiles with DCOF values <0.42 are not recommended for use in areas with wet or slippery conditions. For more information, see ANSI standard A137.1 section 6.2.2.1.10, available at www.tileusa.com. For information on Test Results & Classifications, see p. 294. For Installation Considerations, Care & Maintenance information, see pp. 295-297.

INSTALLATION & PRICING

RECOMMENDED GROUT JOINT: SHADE VARIATION Floor: 3/16" (Overlap should not exceed 33% when installing tile with a length 15" or greater in a staggered brick-joint pattern.) Wall: 1/16" Mosaic: 1/8" RELATIVE PRICING: Medium HIGH (V3)

SIZES

THICKNESS SQ. FT./ CARTON PIECES/ CARTON 18 x 18 Floor Tile 17-1/2" x 17-1/2" (44.45 cm x 44.45 cm) 5/16" 17.04 8 12 x 24 Floor Tile 11-9/16" x 23-3/8" (29.40 cm x 59.30 cm) 3/8" 15.04 8 12 x 12 Floor Tile 11-13/16" x 11-13/16" (30.00 cm x 30.00 cm) 5/16" 14.55 15 10 x 14 Wall Tile 9-13/16" x 13-15/16" (24.99 cm x 35.40 cm) 5/16" 14.25 15 6 x 6 Wall Tile 6" x 6" (15.31 cm x 15.31 cm) 5/16" 12.50 50 2 x 4 Straight-Joint Mosaic

n

12" x 12" Sheet (30.48 cm x 30.48 cm Sheet) 1/4" 10.00 10 2 x 10 Decorative Wall Accent 1-3/4" x 9-7/8" (4.50 cm x 24.90 cm) 1/4" - - 6

TRIM

NUMBER PIECES/ CARTON Floor Bullnose 3 x 12 P-43C9 22 Wall Bullnose (10" side) 3 x 10 S-4310 54 Wall Bullnose Corner 3 x 3 SN-4310 32 Wall Bullnose (6" side) 2 x 6 S-4269 100 Wall Bullnose Corner 2 x 2 SN-4269 25 Quarter Round 1 x 6 A-106 152 Quarter Round Outcorner 1 x 1 UC-106 40 n Dot-mounted

PERFORMANCE CHARACTERISTICS

ASTM# FLOOR RESULT WALL RESULT MOSAIC RESULT Water Absorption C373 < 7.0% < 20.0% < 3.0% Breaking Strength C648 > 250 lbs. 120-230 lbs. > 250 lbs. Scratch Hardness MOHS 8.0 4.0-6.0 8.0 Chemical Resistance C650 Resistant Abrasion Resistance C1027 4 N/A 4 All or select items within this series meet the requirements for these qualifications. For more information, refer to p. 304.

A B O U N D

GLAZED CERAMIC FLOOR, WALL & MOSAIC WITH REVEAL IMAGING

Previous Page
Next Page