Floor, Wall, & Mosaic is continued from previous page.
A M E R I C A N O L E A N . C O M
18 x 18 Field Tile
17-13/16" x 17-13/16"
(45.20 cm x 45.20 cm)
12 x 24 Field Tile
11-13/16" x 23-13/16"
(30.00 cm x 60.48 cm)
12 x 12 Field Tile
11-13/16" x 11-13/16"
(30.00 cm x 30.00 cm)
10 x 14 Wall Tile
9-27/32" x 13-31/32"
(25.00 cm x 35.50 cm)
3 x 3 Mosaic
12" x 24" Sheet
(30.48 cm x 60.96 cm Sheet)
Mosaic tile is dot-mounted on 12 x 24 sheets.
TILE THICKNESS: 5/16" Floor & Wall, 1/4" Mosaic
RECOMMENDED GROUT JOINT: 3/16" Floor
(3/16" when rectangular size is used in a staggered brick-joint
pattern, or when multiple sizes are used in a modular pattern,
overlap should not exceed 33%)
1/16" Wall, 1/8" Mosaic
RELATIVE PRICING: Medium to Low
> 275 lbs.
100 - 230 lbs. 4.0 - 6.0
> 250 lbs.
3 x 12
Wall Surface Bullnose S-4310 (10" side)
3 x 10
Wall Surface Bullnose Outcorner SN-4310
3 x 3
Cove Base S-36C9T
6 x 12
Cove Base Outcorner SC-36C9T
6 x 1
Bullnose, Cove Base and Cove Outcorner trim are intended to coordinate with floor field tile in the standard 90-degree
Special Installation Requirement: For proper bonding,
medium bed mortar should be utilized in installing tiles with a
dimensional length size greater than 20 x 20, large rectangles
or tiles with greater dimensional thickness than normal. Back
buttering tiles of this nature in the installation process will
also assure proper coverage for bonding.
Since there is shade variation in all fired ceramic products,
the tile and trim supplied for your particular installation may
not match these samples. Final selection should be made
from actual tiles and trim and not from tile and trim samples
or color reproductions. Manufactured in accordance with
ANSI A137.1 standards.
Water, oil, grease, etc. create slippery conditions. Floor
applications with exposure to these conditions require extra
caution in product selection.
All or select items within this series are made in the USA.
For more information visit www.americanolean.com.
D A N Y A W I T H R E V E A L I M A G I N G
(EXCLUDES WALL TILE)
Dry & Level - Interior
Wet & Level - Interior
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Wall tile & Mosaics suitable for exterior applications in non-freezing climates only when proper installation methods are followed.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It
replaces the SCOF value of 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and
about the DCOF AcuTest
, visit www.americanolean.com/dcof.
For information on Test Results & Classifications, see page 249.
For Installation Considerations, Care & Maintenance
information, see page 257.
Does not apply to wall tile.
3 x 3 mosaic tile only.
Previous Page - Next Page
-2015-2016 Product Catalog
Choose a different catalog.
Virtual Catalogs | American Olean