Colorbody Porcelain is continued from previous page.
F R E E D O M O F E X P R E S S I O N
Photo features Relevance Timely Beige in 24 x 24 textured field tile on the floor.
Special Installation Requirement: For proper bonding, medium bed mortar
should be utilized in installing tiles with a dimensional length size greater than
20 x 20, large rectangles or tiles with greater dimensional thickness than
normal. Back buttering tiles of this nature in the installation process will also
assure proper coverage for bonding.
Special care should be taken when grouting with dark pigmented colors. A grout
release is recommended to prevent finely powdered pigments from lodging in the
pores of the surface. Use of a latex modified thinset is recommended for installation.
Since there is shade variation in all products, the tile and trim supplied for your
particular installation may not match these samples. Final selection should be
made from actual tiles and not from tile and trim samples or color reproductions.
Water, oil, grease etc. create slippery conditions. Floor applications with exposure to
these conditions require extra caution in product selection. Not for use on ramps.
24 x 48 Field Tile
23-7/16" x 46-15/16"
(59.5 cm x 119.2 cm)
24 x 24 Field Tile
23-7/16" x 23-7/16"
(59.5 cm x 59.5 cm)
12 x 24 Field Tile
11-11/16" x 23-7/16"
(29.65 cm x 59.5 cm)
12 x 24 Brick-Joint Mosaic
11-11/16" x 23-7/16" Sheet
(29.65 cm x 59.5 cm Sheet)
> 450 lbs.
> 450 lbs.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of 0.60 referenced in ASTM
C1028. For more information on the correlation between the two values and about the DCOF AcuTest , visit www.americanolean.com/dcof.
Covered & Uncovered
Textured surfaces only.
Suitable for exterior applications in freezing and non-freezing climates when
proper installation methods are followed.
3 x 12
Cove Base S-36C9
6 x 12
Cove Corner SC-36C9
6 x 1
Bullnose, Cove Base and Cove Corner trim are intended to coordinate with floor field tile in the standard 90-degree installation position.
TILE THICKNESS: 7/16"
RECOMMENDED GROUT JOINT: 1/8" Floor
(3/16" when rectangular sizes are used in a staggered
brick-joint pattern, or when multiple sizes are used in a
modular pattern, overlap not to exceed 33%)
RELATIVE PRICING: High
For information on Test Results & Classifications, see page 78.
A M E R I C A N O L E A N
C O M
Previous Page - Next Page
-2014-2015 Product Catalog Supplement
Choose a different catalog.
Virtual Catalogs | American Olean