Glazed Porcelain is continued from previous page.
A M E R I C A N O L E A N . C O M
EBONY WOOD AH53
WARM CHERRY AH52
BIRCH BEIGE AH50
ASH GRAY AH51
A R B O R H O U S E
Special Installation Requirement: For proper bonding,
medium bed mortar should be utilized in installing tiles with a
dimensional length size greater than 20 x 20, large rectangles
or tiles with greater dimensional thickness than normal. Back
buttering tiles of this nature in the installation process will also
assure proper coverage for bonding.
Use of a latex modified thin-set is recommended for proper
6 x 24 Field Tile
5-3/4" x 23-7/16"
(14.62 cm x 59.44 cm)
TILE THICKNESS: 3/8"
RECOMMENDED GROUT JOINT: 1/8"
(3/16" when rectangular size is used in a staggered brick-joint
pattern, overlap should not exceed 33%)
RELATIVE PRICING: Low
6 x 24
Bullnose trim is intended to coordinate with floor field tile in the standard 90-degree installation position.
> 275 lbs.
Dry & Level - Interior
Wet & Level - Interior
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It
replaces the SCOF value of 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and
about the DCOF AcuTest
, visit www.americanolean.com/dcof.
For information on Test Results & Classifications, see page 249.
For Installation Considerations, Care & Maintenance
information, see page 257.
Previous Page - Next Page
-2015-2016 Product Catalog
Choose a different catalog.
Virtual Catalogs | American Olean