Colorbody Porcelain is continued from previous page.
A M E R I C A N O L E A N . C O M
SQ.FT./CTN PIECES/CTN SHAPE
24 x 48 Field Tile
23-7/16" x 46-15/16"
(59.50 cm x 119.20 cm)
24 x 24 Field Tile
23-7/16" x 23-7/16"
(59.50 cm x 59.50 cm)
12 x 24 Field Tile
11-11/16" x 23-7/16"
(29.65 cm x 59.50 cm)
2 x 1 Brick-Joint Mosaic
11-11/16" x 23-7/16" Sheet
(59.50 cm x 29.65 cm Sheet)
> 450 lbs.
> 450 lbs.
SIZE PIECES/CTN SHAPE
3 x 12
Cove Base S-36C9
6 x 12
Cove Corner SC-36C9
6 x 1
Bullnose, Cove Base and Cove Corner trim are intended to coordinate with floor field tile in the standard 90-degree
TILE THICKNESS: 7/16"
RECOMMENDED GROUT JOINT: 1/8"
(3/16" when rectangular size is used in a staggered brick-joint
pattern, or when multiple sizes are used in a modular pattern,
overlap should not exceed 33%)
RELATIVE PRICING: High
R E L E V A N C E
Special Installation Requirement: For proper bonding,
medium bed mortar should be utilized in installing tiles with a
dimensional length size greater than 20 x 20, large rectangles
or tiles with greater dimensional thickness than normal. Back
buttering tiles of this nature in the installation process will also
assure proper coverage for bonding.
Special care should be taken when grouting with dark
pigmented colors. A grout release is recommended to prevent
finely powdered pigments from lodging in the pores of the
surface. Use of a latex modified thinset is recommended for
Since there is shade variation in all products, the tile and trim
supplied for your particular installation may not match these
samples. Final selection should be made from actual tiles and
not from tile and trim samples or color reproductions.
Water, oil, grease etc. create slippery conditions. Floor
applications with exposure to these conditions require extra
caution in product selection.
Dry & Level - Interior
Wet & Level - Interior
Pool Decking & Other Wet Areas with Minimal Footwear
Ramps & Inclines
Floor tile suitable for exterior applications in freezing and non-freezing climates when proper installation methods are followed.
Mosaics suitable for exterior applications in non-freezing climates only when proper installation methods are followed.
A DCOF value of 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It
replaces the SCOF value of 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and
about the DCOF AcuTest, visit www.americanolean.com/dcof.
For information on Test Results & Classifications, see page 249.
For Installation Considerations, Care & Maintenance
information, see page 257.
Previous Page - Next Page
-2015-2016 Product Catalog
Choose a different catalog.
Virtual Catalogs | American Olean